EU Imposes Anti-Dumping Duties of Up to 27.9% on Cold-Rolled Steel From Five Countries
The Takeaway: Steelmakers exporting cold-rolled flat steel to Europe from five countries face EU anti-dumping duties of between 3.0% and 27.9% from Tuesday. The European Commission found that the dumped imports took 23% of the EU’s free market and undercut EU producers, whose sales and profits fell. It is also the first EU case to establish particular market situations, in India and Taiwan.
The European Union imposed anti-dumping duties of up to 27.9% on cold-rolled flat steel from India, Japan, Taiwan, Türkiye and Vietnam, in force from Tuesday.
The European Commission adopted the regulation on Friday 13 November, and it was published in the Official Journal of the European Union on Monday 16 November. The duties are definitive from the start. In April the Commission had told the parties it would not impose provisional duties, so none were collected while the investigation ran.
Anti-dumping duties are levies meant to offset imports sold below their normal value. The investigation opened on 18 September 2025 after a complaint lodged by Eurofer on behalf of EU producers, and it examined imports from 1 July 2024 to 30 June 2025. Cold-rolled flat steel goes into cars, household appliances, construction materials, machinery, furniture and pipes.
Japan and Taiwan carry the highest rates
Japan’s rate of 27.9% applies to every Japanese producer, from Nippon Steel Corporation and Daido Steel to JFE Steel and Proterial. Taiwan’s sampled producers, China Steel Corporation and Chung Hung Steel, pay 20.7%. All other Taiwanese imports face 27.0%.
India’s rate is 9.5% for all exporters, JSW Steel and Tata Steel among them. Vietnam’s is a flat 16.0%, covering POSCO Vietnam and the other producers.
Türkiye’s producers get the lowest rates, from 3.0% for Tatmetal to 7.8% for Borçelik and for all other Turkish imports. The Erdemir Group is among the other cooperating Turkish companies charged 4.9%.
Each rate is the lower of two margins the Commission calculated. The dumping margin measures how far export prices sat below normal value. The injury margin is the gap between import prices and the price that would give EU producers a target profit of up to 9.97%, depending on the producer.
For Japan the dumping margin was 54.7%, nearly twice the 27.9% duty, because the injury margin set the lower rate.
India sits at the other end: its 9.5% dumping margin fell well short of the 25.5% injury margin, so dumping set the duty.
In The Edge’s reading, that split explains the ranking. Where the Commission found the deepest dumping, in Japan and Taiwan, the harm to EU prices capped the rate; in India, Türkiye and Vietnam, the dumping margin itself was the ceiling.
Definitive anti-dumping duties and margins by country and producer, ranked (%)
| Country and producers | Duty | Dumping margin | Injury margin |
|---|---|---|---|
| Japan: All producers, incl. Nippon Steel and Daido Steel | 27.9 | 54.7 | 27.9 |
| Taiwan: All other imports | 27.0 | 59.6 | 27.0 |
| Taiwan: China Steel, Chung Hung Steel and other cooperating | 20.7 | 33.3 | 20.7 |
| Vietnam: All producers, incl. POSCO Vietnam | 16.0 | 16.0 | 25.8 |
| India: All producers, incl. JSW Steel | 9.5 | 9.5 | 25.5 |
| Türkiye: Borçelik | 7.8 | 7.8 | 12.9 |
| Türkiye: All other imports | 7.8 | 7.8 | 17.8 |
| Türkiye: Other cooperating companies | 4.9 | 4.9 | 16.4 |
| Türkiye: Tatmetal | 3.0 | 3.0 | 17.8 |
Duties apply to the net, free-at-Union-frontier price of the product before duty. Margins are as printed in the regulation, expressed on the CIF Union border price, customs duty unpaid. Other cooperating producers are named in the regulation’s annex.
The duties cover cold-rolled flat products of iron, non-alloy or other alloy steel, but not stainless steel. Article 1 excludes electrical non-alloy steel, annealed coils less than 0.35 mm thick known as black plates, silicon-electrical steel and high-speed steel. A company-specific rate applies only when a valid commercial invoice is presented to the member state’s customs authorities, carrying a declaration dated and signed by an official of the company issuing it that names the manufacturer and the tonnage; until that invoice is presented, the rate for all other imports from the country applies.
Imports gained share as their prices fell by a third
Imports from the five countries rose 28% in volume between 2022 and the investigation period, to 1.69 million tonnes.
Their share of the EU’s free market, the steel sold outside producers’ own downstream plants, climbed from 16% to 23%.
Taiwan overtook Türkiye as the largest supplier, and Vietnam’s shipments almost quadrupled. Japan’s nearly doubled, while Türkiye’s fell by a quarter.
The Commission assessed the five countries together, since each held between 3% and 7% of the market and all competed through the same sales channels.
Cold-rolled flat steel imports into the EU by country, ranked by investigation-period volume (tonnes; change in %)
| Country | 2022 | Investigation period | Change |
|---|---|---|---|
| Taiwan | 293,280 | 499,836 | +70.4 |
| India | 405,319 | 414,530 | +2.3 |
| Türkiye | 448,012 | 334,885 | -25.3 |
| Japan | 126,021 | 250,001 | +98.4 |
| Vietnam | 48,282 | 187,767 | +288.9 |
| Five countries | 1,320,914 | 1,687,020 | +27.7 |
The investigation period runs from 1 July 2024 to 30 June 2025. Changes are The Edge’s calculations from the printed volumes.
Prices moved the other way. The five countries’ average import price fell 34% over the period, to EUR 695 a tonne. Vietnam’s dropped furthest, by 43%.
Imports from all other countries averaged EUR 735 a tonne, still above the five’s price. Their market share slipped to 11% from 14%.
The Commission concluded that those imports did not break the link between the dumped steel and the harm to EU producers.
The sampled exporters undercut EU producers, selling below their prices for the same product types, by between 5.3% and 13.4%. Türkiye’s Borçelik showed the widest margin.
EU producers lost sales and margin
EU producers’ free-market sales fell 15% over the period, faster than the 10% decline in free-market demand.
Their share of that market dropped to 66% from 70%. Average selling prices fell 31% while unit costs fell 23%.
The regulation gives profitability only in ranges: 10% to 15% of sales in 2022, down to 0% to 5% in the investigation period. Cash flow at the sampled producers ended 61% below its level at the start.
Employment in the product fell 8% to 8,598 full-time equivalents. The producers are spread across 13 member states, from Germany and Italy to Spain and Sweden.
Not every indicator worsened. Investment was 33% higher than in 2022, mostly for decarbonization projects, and output per employee rose 8%, mainly because employment fell while production held broadly stable.
The industry ran at 72% of capacity, leaving about 12 million tonnes unused. The Commission cited that spare capacity in rejecting claims that the duties would leave EU buyers short of steel.
Japanese producers argued that 2022, a strong post-pandemic year, made the decline look worse than it was. The Commission rejected the claim, saying it judged the trend across the whole period rather than against one year.
No users or unrelated importers filed complete questionnaire replies. The Commission concluded that cold-rolled steel is generally a limited share of production costs for carmakers, appliance makers and builders, so any price rise would have a limited effect on them.
EUR 1.2 billion of trade and a first for EU trade defense
The Commission puts the EU market for cold-rolled flat steel at some EUR 23.2 billion. It values all imports of the product at EUR 1.775 billion.
Taiwan supplied the most by value, EUR 345 million, followed by India at EUR 282 million.
Türkiye accounted for EUR 240 million and Japan for EUR 180 million. Vietnam, the smallest of the five by value, supplied EUR 125 million.
Together the five supplied EUR 1.172 billion, about two-thirds of all imports, on The Edge’s calculation.
The Commission said this is the first investigation in which it has established particular market situations, where conditions in an exporter’s home market prevent a proper comparison of domestic and export prices. In such cases it may construct the normal value instead of using domestic sales prices.
It found one in India, where it said government measures affected the domestic price of iron ore. It found another in Taiwan, where it said Chinese overcapacity raised imports of Chinese cold-rolled steel and pushed down domestic prices. The Commission described the case as of “systemic importance for trade defence”.
Duties sit beside the EU’s new steel quota regime
The duties come on top of the EU’s new steel measure, applicable since 1 July 2026, which the regulation describes as addressing the trade effects of global overcapacity on the EU steel market.
Japan’s government argued that the steel overcapacity regulation, which it said reduces the import quota and introduces a 50% out-of-quota duty, would further reduce imports and called the need for duties into question. The Commission rejected the argument, saying a quota would not remove the price injury it had found and that the two instruments serve different legal purposes.
Eurofer asked for the duties to be collected retroactively on imports the Commission had made subject to registration in December 2025. The Commission refused, ruling that retroactive collection depends on provisional duties, which were never imposed.
New exporters from Taiwan and Türkiye that did not ship to the EU during the investigation period can ask to be charged the rate for cooperating companies, if they show they are unrelated to the companies investigated and have since exported or signed a binding contract to do so.
Method: duties, margins, volumes, prices and the injury findings are from Commission Implementing Regulation (EU) 2026/2547 of 13 November 2026, published in the Official Journal of the European Union on 16 November 2026; the market and import values and the particular market situation findings are from the European Commission’s Directorate-General for Trade and Economic Security news item of 16 November 2026; percentage changes, the five-country import total and its share are The Edge’s calculations.
Sources: European Commission, The Edge.



